Download App
Follow Us
  • Facebook
  • YouTube
  • Instagram
  • TikTok
  • X

Infineon's 2026: Automotive Remains the Biggest Business, New Profit Primarily from Power

2026-11-19 17:20:02
MangoSweet
0 Fans   20 Following   2 Posts

In the last quarter of fiscal 2026, Infineon's automotive revenue was €2.131 billion, €394 million more than power systems. In the line for segment profit, the order changed. Automotive earned €469 million, power systems earned €523 million.

As of the end of September 2026, Infineon's annual revenue was €16.353 billion, up approximately 12% year-on-year. Operating profit was €2.214 billion, up 46%, and net profit was €1.512 billion, up 49%. Revenue in the last three months reached a record €4.706 billion, €534 million more than the previous quarter. Gross profit increased by €264 million in the same period, while R&D expenses remained roughly flat compared to the previous quarter. By the end of the fiscal year, Infineon was able to support more sales with similar quarterly R&D spending. Annual R&D expenses still reached €2.583 billion, exceeding 15% of revenue.

To see where these profits came from, one needs to turn to the second half of the financial report. Infineon adjusted its organizational structure in July. According to restated data, automotive annual revenue was €7.765 billion, accounting for nearly half of the group, and remains the business ranked first in both revenue and segment profit. Power system revenue was €5.434 billion, of which €1.295 billion was the increase over the previous year, accounting for about 77% of the group's annual revenue increment. Profits were more concentrated. Power system segment profit increased by €653 million, while the group's total segment profit increased by only €663 million. Edge system revenue grew 2% in the same period, segment profit declined 8%, and the three departments had quite different years.

The contribution of data centers can be calculated more finely. Infineon's investor materials for the same period gave an annual data center power supply revenue of about €2.2 billion, of which AI data centers contributed about €1.7 billion, and traditional data centers about €0.5 billion. The expectation for fiscal 2027 is close to €4 billion. Based on this calculation, the sales increase needed for data center power supply alone in the new fiscal year is equivalent to the €1.691 billion increase from all Infineon businesses combined in the past year. Power systems also engage in business such as industry and power grids. The segment profit increment involves multiple product categories. The financial report does not further break down how much the data center power supply earned separately.


01. More Chips Infineon Can Sell per Car

The automotive business grew 5% this year, with the annual segment profit margin dropping slightly from 20.4% to 20.0%. Recovery is mainly reflected at the end of the fiscal year, where the Q4 profit margin returned to 22.0% from 18.1% in the previous quarter. Infineon's revenue growth expectation for the next fiscal year is in the middle teens.Estimating with 15%, this is equivalent to adding about €1.16 billion on top of the €7.765 billion basis. To achieve such an increment, besides waiting for existing models to increase production, one must strive for components that were previously supplied by others on each car.

The $2.5 billion acquisition of Marvell's automotive Ethernet business acquired exactly such a position. Originally scattered control functions across the vehicle body are gradually being consolidated into zone controllers and central computers. Control boxes can be reduced, but the data that needs to be transmitted between cameras, sensors, and actuators is increasing. Infineon's original microcontrollers are responsible for executing commands, while acquired switch chips, transceivers, and bridges are responsible for connecting the in-vehicle network. In the past, if a new car selected Infineon's control chips, the network interface might still be supplied by another vendor. Now, the two types of products can be delivered together to the automotive company's design table.

Infineon estimates in investor materials that on a software-defined car adopting a layered electronics and electrical architecture, the potential bill of materials value of its own products on devices such as computing, Ethernet, analog, and storage is approximately $500.The word "potential" is very important. The number of components drawn in the reference solution versus the number of components ultimately kept in the procurement contract is separated by platform selection, configurations of vehicles at different price points, and actual sales volume. Whether the $2.5 billion acquisition was worthwhile ultimately depends on how many automotive projects also adopt the supporting network chips when using Infineon microcontrollers.

There are similar opportunities in the electric drive system, though car manufacturers calculate a different equation. When Rivian selected traction inverter power modules for the R2 platform, both silicon and silicon carbide entered the supply plan, coming from Infineon's same HybridPACKDriveG2 product family, the same module platform, with different voltage levels.

The list also includes AURIX microcontrollers and power management chips. The module is responsible for converting the battery's direct current to the alternating current required by the drive motor. The control chip decides how to drive the module, and the power management chip supplies power to the control circuit. Even if different configurations select different power modules, the supporting control and power devices still have the opportunity to remain on the same platform.

The selection of "silicon and silicon carbide simultaneously" was a cost compromise in 2023, but now it is already a standard approach. Silicon carbide is long ago no longer exclusive to high-spec: 6-inch conductive substrates fell from the 10,000 yuan level in 2022 to below 2,000 yuan in 2025; the average price of 6-inch substrates from SINOCERA fell 64.5% over two years; the average price of hybrid silicon carbide modules also decreased slightly. The price war bottomed out in 2025, and in 2026 6-inch substrates rebounded significantly, 8-inch substrates stopped falling and stabilized—the premise of "wait until silicon carbide is cheaper before getting on the car" itself is no longer valid.

Car manufacturers currently calculate not "whether to use silicon carbide", but "where to use it and how much": The main drive of 800V platforms almost defaults to silicon carbide; in dual-motor vehicles, the drive axis mainly relied on for daily driving uses all-carbon or hybrid-carbon modules to reduce conversion loss, while the other axis mainly supplements peak power during acceleration using lower-cost silicon-based IGBTs, which is equally valid from an engineering perspective. The usage time and working load of the two axes differ; installing the same high-efficiency device in different positions yields different range gains. The hybrid-carbon module is right in the middle – SiC chips account for about 40% of material costs. By making concessions on efficiency and cost, solutions that were originally valid only for vehicles above 300,000 yuan are now affordable for volume-selling vehicles at the 200,000 yuan level.

For Infineon, the true meaning of this calculation is not betting on silicon carbide penetration rate, but "no matter how the car company finally chooses, the components come from the same family". All-carbon silicon, hybrid-carbon, and pure silicon three solutions can all be covered by HybridPACKDriveG2. AURIX and power management chips follow up. Once the platform is set, subsequent model configuration changes make it difficult to switch suppliers. The cost is that silicon carbide price reductions also press down on unit prices and gross margins – the automotive segment profit margin dropped slightly from 20.4% to 20.0%, and one reason lies here. Own wafer foundry, 8-inch substrate supply, and 12-inch process validation are the trump cards used to keep costs in check.

02. 12-Inch is the Next Generation, 8-Inch is This Generation

On October 15, 2026, Infineon signed a multi-year silicon carbide substrate supply agreement with Wolfspeed, advancing the existing cooperation from 150mm to 200mm, which is from 6-inch to 8-inch.Less than a month later, on November 9, Infineon also announced that it manufactured working power devices using 300mm, that is, 12-inch silicon carbide wafers in Villach, Austria.The two news items were 25 days apart. On one side, they were validating next-generation manufacturing processes; on the other side, they were preparing materials for commercial production at bases such as Kulim, Malaysia.

The diameter increased from 200mm to 300mm, and the wafer area expanded to 2.25 times the original. According to Infineon's estimate, the number of chips that can be arranged on one wafer is approximately 2.3 times the original. What truly determines automotive chip pricing is, after a batch of wafers are processed, how many chips meet voltage, resistance, and other specifications, and how many can be stably produced in the next batch at similar costs. The factory can produce functional devices on the first large wafer, but still needs batch after batch of production data to calculate the price applicable for long-term contracts.

A hypothetical calculation shows the difference. If the total cost of processing one large wafer is twice the original, and the number of qualified chips reaches 2.3 times the original, the front-end manufacturing cost per chip decreases by approximately 13%. If the initial yield is relatively low and qualified chips only increase to 1.8 times the original, the cost per chip would instead rise by about 11%. This set of numbers is just an example; Infineon has not disclosed the actual cost per chip for 12-inch silicon carbide. For car companies requiring stable multi-year supply, yield records of mass production processes, certification progress, and substrate supply capabilities all have tangible procurement value.

Additionally, Infineon validated the cold cleaving slicing process on 300mm silicon carbide ingots.Traditional wire saw cutting loses some material in the saw kerf. Cold cleaving aims to reduce loss, shorten processing time, and allow extracting a few more wafers from the same ingot. Expanding wafer diameter strives to make more chips per wafer. Improving the slicing process strives to produce more wafers per ingot.

03. Factory Building Completed, When Will the Next Equipment Be Moved In

Infineon's continuing operations brought €4.137 billion in operating cash flow in fiscal 2026, €959 million more than the previous year. The change in free cash flow was larger, shifting from negative €1.051 billion to positive €993 million, improving €2.044 billion in one year. Between these two figures lies the impact of acquisitions on cash. According to Infineon's calculation standards, free cash flow includes cash inflows and outflows from purchasing and selling businesses. Net spending on major M&A this fiscal year decreased by €1.633 billion compared to the previous year, accounting for about 80% of the free cash flow improvement. Last fiscal year, a large sum of cash was spent to purchase the automotive Ethernet business; the returns from the product portfolio will only be visible after automotive projects gradually reach mass production.

Excluding the impact of major M&A and net investment in large frontend plants, adjusted free cash flow was €1.925 billion, up approximately 7% year-on-year, with the proportion of revenue dropping from 12.3% to 11.8%. By the end of September, net debt was €4.713 billion, essentially flat compared to a year ago. Next, Infineon needs to allocate €3 billion to €3.5 billion in investment for fiscal 2027, while full-year depreciation and amortization are expected to rise from €1.896 billion to about €2.2 billion. The timing of new equipment entering the factory and being put into use now directly affects cash expenditures and profits.

Several factories are at different stages. Dresden SmartPowerFab, with a total investment scale of €5 billion, was already commissioned in July 2026. Next, it needs to configure equipment for the fourth production plant and increase output. Kulim continues to expand silicon carbide capacity, with 8-inch substrates already having multi-year supply arrangements. Villach, besides validating 12-inch silicon carbide, also needs to advance 300mm gallium nitride production within existing clean rooms, planning to cumulatively invest about €1.1 billion by 2034, starting production no later than the end of 2027. Writing these projects broadly as "capacity expansion" easily causes one to miss the time difference. Factory unveilings, equipment commissions, process validations, and customer bulk pickups each have their own dates.

Infineon set the fiscal 2027 revenue target at about €20 billion. Compared to the just concluded fiscal year, it needs to sell an additional €3.65 billion. If data center power supply increases from €2.2 billion to close to €4 billion, it can roughly contribute half of the increment; automotive is an important source for the remaining increment. Equipment entering the factory early gives the capacity to take orders when customers increase production, though it may also bear idle costs for a few quarters first. Equipment entering the factory late means spending less cash in the short term, but once the vehicle model validation and mass production window is missed, making up capacity might not be in time.


Summary.

Automotive remains Infineon's basic foundation, determining the company's downside; power systems are the profit variable of this year. The €653 million increment almost supported the growth of €663 million in the group's total segment profit. However, the €3.65 billion for fiscal 2027 will not automatically be realized: Data center power supply going from €2.2 billion to €4 billion is the half that can be clearly calculated on the books; the €1.16 billion growth for automotive, however, remains questionable.

Tag: Power
Feedback