Definition and Core Role

Automotive spray painting, also known as vehicle coating, refers to the professional process of evenly applying specialised paint onto metallic or non-metallic body panels, which then dries and cures to form a continuous film that provides both protection and aesthetic appeal. Automotive paint consists of resins, pigments, solvents, and additives. As one of the four major processes in vehicle manufacturing, painting plays a vital role in delivering anti-corrosion protection, aesthetic finishing, and weather resistance to the vehicle body. In the automotive repair sector, respraying is the final stage following panel beating, and its quality directly determines the vehicle's post-repair finish and resale value.
Paint Classification
By layer structure from bottom to top, automotive paints are categorised into primer, primer surfacer / undercoat, basecoat, and clearcoat. By application, they are divided into factory OEM paints and refinish paints. Based on the visual finish, basecoats are primarily classified into three types: solid paint , metallic paint, and pearl paint. Solid paint consists of resin, pigments, and additives, offering a pure colour finish at a lower cost. Metallic paint incorporates aluminium flakes into the base, delivering a sparkling metallic sheen. Pearl paint (mica paint) replaces aluminium particles with mica flakes coated with titanium dioxide and iron oxide, producing a pearl-like shimmer under lighting.
From an environmental standpoint, the industry is transitioning from conventional solvent-based paints to waterborne paints. Waterborne paints utilise water as the carrier, resulting in significantly lower VOC (volatile organic compound) emissions than solvent-based alternatives and causing less environmental impact. Following over two decades of development in Europe and North America, the use of waterborne coatings in automotive painting has reached full maturity.
Painting Process Flow
Automotive painting is broadly divided into two main systems: factory OEM painting and refinish painting (respray), each tailored with distinct procedural focuses.
Factory OEM painting is carried out on the assembly line, commencing immediately after the chassis and bodyshell are welded. The standard process comprises: pretreatment (degreasing - water rinsing - surface conditioning - phosphating), electrodeposition coating (ED coat) (cathodic electrocoat primer), seam sealer application, primer surfacer application, basecoat spraying, and high-bake curing. Factory painting employs a high-bake curing process with temperatures reaching up to 200°C, yielding a cured paint film that boasts high hardness, superior adhesion, and outstanding durability.
Refinish painting is a core workflow in body and paint repair workshops, following these standard steps:
Damage assessment and surface preparation—Assessing the extent of paint damage and feather-edge sanding to guarantee optimal adhesion between new and existing paint layers.
Body filler application and sanding—Applying body filler (putty) over dents and sanding it completely flush with the surrounding body panel once cured.
Primer surfacer application—Spraying primer surfacer to fill fine sanding scratches and enhance basecoat bonding, followed by fine sanding once dry.
Basecoat spraying—Applying the colour basecoat to deliver the intended colour and visual finish. Metallic and pearl finishes use a two-stage process requiring a basecoat followed by a clearcoat. After basecoat application, a 5-to-15-minute flash-off time is necessary for solvents to evaporate before clearcoat spraying.
Baking and curing—Refinish paint utilizes low-bake curing (60°C to 80°C) to prevent thermal damage to original vehicle parts and trims. Baking duration typically spans 30 to 60 minutes.
Post-paint detailing—Polishing and waxing the freshly painted panels to eliminate defects like orange peel and dust nibs, maximising gloss and clarity.
Spray Equipment and Environment
Spray painting operations must be carried out inside dedicated spray booths (oven booths) to maintain a dust-free environment and precise curing temperatures. Spray booths are fitted with ventilation, heating, and air filtration systems. In accordance with the JT/T 324-2022 standard "Automotive Spray-Baking Booth", booth doors must remain sealed during spraying, ventilation and exhaust filtration systems must be activated, and the differential pressure between the booth interior and exterior should be maintained between 10 Pa and 50 Pa.
Repair Costs
The cost of paint repair varies based on damage severity, vehicle segment, and workshop tier. Minor surface scratches can often be resolved via compounding and polishing (RM0 to RM100), while small touch-ups can be addressed with touch-up pens (RM30 to RM80). For standard mass-market passenger cars requiring a panel respray, prices range from around RM200 to RM600 per panel, whereas premium and luxury marques range between RM1,200 and RM2,500. For a full-body respray, solid paint costs around RM3,000 to RM6,000, with metallic or pearl paint starting from RM8,000 upwards. Workshops generally quote on a per-panel basis—for instance, roughly RM800 for a complete bonnet respray and around RM600 for a full door respray.
Industry Standards and Future Trends
On the industry regulatory front, the GB/T 13492-2025 national standard "Coatings for Automobiles" was gazetted in August 2025 and took effect in February 2026. JT/T 1530-2024 "Safety and Environmental Protection Requirements for Automotive Body Painting Operations" was implemented in March 2025. Additionally, JT/T 937-2025 "Safety Evaluation Specification for In-Service Automotive Spray-Baking Booths" took effect in July 2025. Together, these standards establish a comprehensive framework governing safety, environmental protection, and quality assurance in automotive painting.
As of 2026, automotive painting technology is advancing swiftly towards green sustainability, automation, and high efficiency. The adoption of waterborne paints and ultra-low-VOC coatings continues to gain traction. The deployment of automated robotic spray arms and AI-driven vision inspection systems has substantially elevated paint film consistency and finish quality. High-emission, energy-intensive legacy painting processes are being phased out at an accelerated pace. In terms of material science, low-carbon, high-durability coating formulations continue to emerge. Overall, automotive spray painting is shifting from a manual skill reliant on individual craftsmanship into a modern high-precision engineering discipline integrating advanced materials, robotic automation, and green technologies.