In the Malaysian SUV market, many buyers compare Proton X70 and Kia Sportage when choosing a car. These two models are quite close in price and positioning. Today, we will make a detailed comparison from multiple aspects to help you save time on research.
Proton X70 OTR price in Malaysia is RM 106,800 - 122,300, with a total of 3 versions, including 1.5L Standard 2WD (RM 106,800), 1.5L Executive 2WD (RM 115,800), 1.5L Premium 2WD (RM 122,300), etc.
Kia Sportage OTR price in Malaysia is RM 129,639 - 179,320, with a total of 4 versions, including 2025 1.6T DCT 4WD High (RM 179,320), 2025 1.6T DCT 2WD High (RM 159,320), 2025 2.0L AT 2WD High (RM 139,639), etc.
From the price perspective, the starting price of Proton X70 is indeed RM 22,839 cheaper than Kia Sportage. If your budget is limited, Proton's entry-level version can already meet daily needs. However, note that the cheaper few thousand might have trade-offs in features, depending on your specific requirements.

Proton X70 safety rating is 5★ (ASEAN NCAP), active safety system includes ADAS (ACC, AEB, LKA, LDA, BSM, RCTA).
Kia Sportage safety rating is 5★ (ASEAN NCAP), active safety system includes Drive Wise.
Both cars have the same safety rating, safety features are quite comprehensive within this segment. New cars nowadays don't have poor safety, no need to worry too much about this.

Proton X70 body length 4400 mm, trunk 400 L.
Kia Sportage body length 4400 mm, trunk 400 L.
The dimensions of both cars are almost the same, interior space difference is not significant. Cars of this level are fully sufficient for daily use.

Proton X70 warranty 5 years/150,000km, service interval every 10,000km or 6 months.
Kia Sportage warranty 5 years/300,000km, service interval every 10,000km or 6 months.
Proton X70 and Kia Sportage are both mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale value more, you can prioritize the one with better reputation; if you care more about value for money and features, choose the one with richer configuration. Ultimately, it is suggested to test drive both, personal experience is the most important.
Overall, Proton X70 and Kia Sportage are both very good models in the Malaysian market. Which one to choose depends on your personal needs and budget. It is recommended to do your research, compare quotes from several car dealerships, and then test drive to make a final decision. Buying a car is a big deal, spending some time doing research will never be wrong.


GM's world still exists, but there aren't enough new cars.
Author|Liu Xinyi Editor|Mao Shiyang
Auto Pixel (ID:autopix)Original
SAIC-GM's farewell and rebirth arrived in almost the same month.
On August 5, SAIC and GM extended SAIC-GM's joint venture term by 20 years, until 2047.
Four words stood on site: Together to a New Realm. Along with the renewal, the new task for this joint venture was also confirmed.
Three weeks later, on August 28, the Buick Envision 2026 model will be discontinued in the US.
The two events are independent but coincided in the same month.
The Envision story goes back eleven years. At the end of 2015, the first batch of Envisions destined for North America departed from Yantai Port, entering Buick dealerships in the US, Canada, and Mexico the following year. Over the next ten years, cumulative exports reached 420,000 units. After 2017, it became GM's only model imported from China to the US.
Starting in 2018, the Envision bore a 25% tariff, and GM's application for exemption was unsuccessful. On January 22, 2026, GM announced stopping production of Envisions for the US market in China; the next generation will move to the Fairfax, Kansas factory in 2028.
By May this year, the inventory cycle for this model in the US had exceeded 300 days.

▍Old photo of Buick Envision at Yantai Port
One door is closing, while another is opening. According to the arrangement after the renewal, the Buick Zhijing series independently developed by SAIC-GM will be exported overseas starting from October this year, with target markets including the Middle East, Africa, South America, Mexico, and Asia-Pacific.
Tariffs shut out the US car market, and GM hands the world outside to Shanghai.
01
Outside the US, GM is Short of Cars
This renewal did not change the 50:50 equity ratio, nor disclose new investment amounts. What changed is the division of labor.
At the signing ceremony, GM Global Senior Vice President and China President Luo Xu said, SAIC-GM has established local capabilities in engineering, manufacturing, and quality, "We can bring these advantages to the international markets of the Middle East, Africa, South America, Mexico, and the Asia-Pacific region", relying on GM's existing sales and service layouts in these regions.
In organizational language, what he revealed is that SAIC-GM and Pan Asia define the products, while GM provides global channels outside the US market.
The specific implementation method is quite light. SAIC-GM will not build its own sales network overseas, but will fully reuse GM's existing system.
The first exported car is the Buick Zhijing E7, with the first stop in South Korea. GM Korea is responsible for pricing, marketing, and after-sales, while SAIC-GM is only responsible for production, supply, and technical support. Later in other markets, a similar model is expected to be used.
The flow of products and resources has changed. In the past, GM brought global products to China; next, SAIC-GM will send products developed in China back to the world.
This is not common in "Joint Venture 2.0". When most foreign parties allow Chinese joint ventures to go global, they first demarcate their core markets. GM did not give SAIC-GM just an edge market to test the waters; it opened the Middle East, Africa, South America, Mexico, and Asia-Pacific all at once, almost including everything GM owns outside the US. And it allows Chinese products to directly connect to its sales and service system built over many years.
Why now, why these markets, the answers are written on GM's two reports respectively.

▍Group photo when GM Brazil was founded in 1925
The first is North America. In Q2 2026, GM North America's adjusted EBIT margin reached 8.6%, full-size pickup share 43%, No. 1 for the seventh consecutive year. The company raised its performance guidance for the second time this year, raising the adjusted EBIT expectation to $14-16 billion.
This is a self-sustaining machine, expensive, large, high-spec, with brand premium, plus the cash flow of subscription services. It does not need external funding and less external products.
The second report is outside the US.
In 2025, the US market contributed nearly 70% of GM's global sales. Following the US were China, Uzbekistan, Brazil, Kazakhstan, Colombia, Chile, Ecuador, Peru, Kuwait. Apart from the US and China, the rest are all emerging markets.
The cars these markets want have almost no overlap with the cars produced by that machine in North America.
And GM's position in these places is very uneven.
Mexico remains GM's stronghold, market share long second only to Nissan. South America slowed down in defense: In 2025, GM's share in Brazil dropped from 12.0% to 10.3%, Volkswagen rose to 17.1%, BYD rose to 4.4%.
The absence in the Middle East is even more obvious. In Saudi Arabia, GM has fallen out of the top mainstream brands, while SAIC MG has entered the top sales list. Africa has left a damaged network; Egypt still has manufacturing and operational systems, but GM has long exited the major business of South Africa and East Africa.
For Mexico and South America, SAIC-GM is defending the ring; for the Middle East, it's supplementing products; for Africa, there is a hint of returning to old markets.
02
Ultium Failed to Stitch GM Together
In 2014, Mary Barra became GM's first female CEO.
The GM she took over had just emerged from bankruptcy restructuring, still retaining a huge global business map. Opel and Vauxhall in Europe, Chevrolet laying networks in India, South Africa, and Southeast Asia, Holden stayed in Australia, Korea Daewoo system responsible for small cars, Brazil responsible for South American products.
These businesses allowed GM to maintain the image of a global automaker, but also kept it burdened with the costs of a global automaker for a long time.

Mary Barra adopted a clear financial standard. If a business cannot generate sufficient returns, it is no longer retained due to scale, history, or global status.
From 2015 to 2020, GM began to intensively take action against markets that could not generate sufficient shareholder returns, withdrawing from Europe, Russia, India, Southeast Asia, and Australia, selling Opel, Vauxhall, and the Thailand factory.
Profit discipline achieved results, capital gradually flowed to large cars North America was best at; the cost was that GM simultaneously dismantled the product system serving global needs.
Opel once provided front-wheel-drive sedans and European engineering capabilities, Holden mastered rear-wheel-drive platforms, Korea was responsible for low-cost small cars. After exiting these markets, GM also lost most of the capabilities to serve global needs.
By 2020, GM had basically completed global contraction. North America kept pickups, large SUVs, and high-profit fuel cars; China still had a huge joint venture system; markets like South America, Korea, Middle East were compressed into regional businesses maintaining their own profitability.
They were like isolated islands scattered on the world map. With the competitive landscape unchanged, they could continue to exist relying on inertia, contributing limited but stable profits.
But now, competition has intensified.
In 2025, the Brazilian car market continued to grow, but GM's share dropped from 12.0% to 10.3%; Volkswagen rose to 17.1%, BYD rose to 4.4%. In the Mexican market, GM's sales dropped 3.4%, while Nissan, Toyota, Kia, and Mazda all grew.
The results are written on GM's International Operations (GMI) report outside North America. In 2025, GMI wholesale sales dropped 8.1%, revenue dropped 3.3%; excluding Chinese joint venture business, adjusted EBIT dropped 32.8%, leaving only $426 million.
What these regional businesses lacked was not brand and channels, but a set of new products that could be continuously delivered to dealerships.
GM certainly knew the side effects of contraction. Once contraction was basically completed, Mary Barra had to find a new technical base, without re-establishing those regional R&D centers, to reconnect North America, China, and the remaining international markets.
Electric vehicles seemed to provide this opportunity exactly.
By 2019, Tesla had completed the difficult climb of Model 3, delivering 367,500 units for the year; the Shanghai factory from groundbreaking to delivery took less than a year, proving that a highly centralized model, battery, and software system can be quickly replicated between the US and China.
The signal from the capital market was more direct. In January 2020, Tesla's market value surpassed GM and Ford combined for the first time, and exceeded Toyota six months later. For GM which had just completed global contraction, electrification not only represents the future of the auto industry but also provides a shortcut to cover the global again without rebuilding the old system.
Starting in 2018, GM turned the funds saved after cutting losses to electrification and autonomous driving; by March 2020, GM officially released Ultium and promised to invest over $20 billion before 2025. China subsequently held the corresponding technology release.
Ultium's engineering ambition is huge. GM hopes it will simultaneously cover compact crossover vehicles, SUVs, Hummers, and large pickups, and allow North America and China to share scale, supply chain, and R&D costs.

But the product that first proved Ultium was the Hummer EV equipped with about 205 kWh batteries. This number is double the common battery capacity of China's mainstream large pure electric vehicles. From the beginning, Ultium was pulled towards American-style large cars by the goals of ultra-long range, thousand-horsepower power, and large pickups; it can continuously add modules to cover upwards, but it is difficult to use the same system to build down cheap models.
More fatally, GM bet on the wrong direction of market convergence. Ultium bet on highly modular battery cells, modules, and e-drive to拼出 as many models as possible; the place where markets truly form barriers has shifted to software, electrical/electronic architecture, and continuous iteration capabilities, while model diversity is actually converging.
In April 2026, GM notified suppliers to indefinitely postpone the development of the next generation Silverado EV and Sierra EV models; major platform updates are not expected until after 2030.
China, however, quickly shifted to lower-cost lithium iron phosphate, faster charging speeds, plug-in hybrids and range extender, and smart cockpits and assisted driving driven by local suppliers.
The base originally used to unify China and the US ultimately failed to connect either end.
Ultium did not stitch GM back together after it was dismantled. It left behind battery, e-drive, manufacturing, and safety verification capabilities, and made an inescapable conclusion: North America, China, and outside the US can no longer be defined by the same base.
03
SAIC-GM, Established Twice
At the end of 2024, SAIC-GM was not facing how to go global, but whether this company was worth continuing to exist.
That year, SAIC-GM sales dropped to 435,000 units, down 56.54% year-on-year, the largest decline among SAIC Motor's whole vehicle enterprises. In December, GM accrued 2.6 to 2.9 billion USD in impairment for its Chinese joint venture business, and confirmed about 2.7 billion USD in restructuring costs, totaling over 5 billion USD.
This money was both a settlement for the past and drew the survival line for SAIC-GM.
Ultium did not bring the expected transformation to the China business, and Detroit had no other mature global plan to send over. SAIC-GM must reduce scale, restore profitability, and rely on the China team to re-answer the most basic question: How exactly should the next generation of products be built.
In April 2025, the Xiaoyao Architecture and Buick's high-end new energy sequence Zhijing were released together.
Xiaoyao retained Ultium's e-drive, manufacturing, and safety accumulation, but the technical route has shifted to China: batteries switched to 6C Lithium Iron Phosphate, power covers pure electric, plug-in hybrid and range extender, electronic/electrical architecture also shifted to central computing.
More important than parameter changes is that product definition rights remain in China.
In the past, Pan Asia mainly adapted Detroit platforms for China. With Xiaoyao and Zhijing, technical routes, product forms, prices, and supply chains started to be defined by the China team.
The results came faster than expected.
Zhijing L7 first stabilized in the mid-to-large new energy sedan market; on April 22, 2026, Zhijing E7 went on sale, with the lowest trade-in equity price of 154,900 yuan, breaking 10,000 major orders within 90 minutes of launch, exceeding 10,000 deliveries in the first month, becoming the first joint venture new energy model to achieve this.

The reversal at the operational level started earlier. In 2025, SAIC-GM sales rebounded to 535,000 units, up 22.99% year-on-year; GM's business in China achieved profitability for consecutive quarters.
It first proved it no longer needed continuous blood transfusion from headquarters, and then proved that new energy vehicles defined by the China team can obtain the market.
Thus, the direction of renewal discussion changed. From whether SAIC-GM needed to continue existing to how to maximize its value.
This capability did not appear suddenly. In 1997, Pan Asia and SAIC-GM were established on the same day, going from localization, model modification all the way to whole vehicle forward development. In 2010, the new S-Orio developed throughout Pan Asia went on sale and went overseas; in over twenty years, it developed over 30 series and over 150 models for Buick, Chevrolet, and Cadillac.
In the past, this capability was mainly used to change GM's global products into what China needs. In the Zhijing era, the direction reversed; products defined by the China team began to fill the gaps in GM's global product line.
Chinese joint ventures outputting products in reverse is no longer an isolated case. Volkswagen, Nissan, Mazda, and Kia are all sending models developed and produced in China overseas.
The real difference is the scale of openness; the more important overseas profits and capacity are, the clearer the boundaries drawn by the foreign side are; the more the overseas system needs replenishment, the larger the space gained by the China team.
GM's speciality lies in that its most protected North American profit core has almost no conflict with products SAIC-GM can provide. What GM needs most to protect is large pickups and SUVs in North America, which happen to fill the product gaps in GM's overseas network.
South America, Korea, Middle East, and Africa still have GM's brands, factories, and channels, but new product supply has become thin. Incorporating Chinese models is faster and cheaper than rebuilding R&D systems for each region.
Eleven years ago, the Envision sailed from Yantai to the US, China's role in GM's global system was still a manufacturing base. Eleven years later, SAIC-GM went global again with products it defined itself.
What GM handed over was not a world still growing, but a network where channels are still valuable but products are increasingly cut off. What SAIC-GM obtained was not a ready-made market, but the power to repair it.
This 20-year contract is not just a continuation of the previous joint venture relationship. It is more like SAIC-GM's second establishment.

This article is original content by Auto Pixel (autopix)
Unauthorized, do not reproduce

8月,国内轮胎行业延续"需求弱、开工降、库存高位"的运行特征。从订单结构看,半钢胎受雪地胎排产支撑,内销出现边际改善,但欧盟贸易摩擦拖累出口,叠加国内替换需求增量不足,整体订单延续弱势。
全钢胎则随着北方高温缓解、南方汛期收尾,替换需求温和回暖,但运力过剩限制反弹空间,行业供应面或持续控产检修现状。
半钢胎:雪地胎托底内销,出口仍被拖累
从半钢胎样本企业订单情况来看,整体订单延续弱势运行,出口端压力尤为突出。
行业调研显示,42%的企业出口订单量较上月呈现不同程度的下跌,58%左右企业出口订单较上月持平。订单弱化的核心原因是欧盟反倾销制约。

为应对欧洲市场直供订单流失,企业一方面积极开拓其他海外市场以求整体订单稳定性,另一方面依托海外基地承接转移订单。
越南、泰国等东南亚中资基地2026年前四月对欧轮胎出口同比分别增长165%和147%,但东南亚整体产能已接近满负荷,短期难以完全补位。部分具备海外产能的企业海外基地订单饱满,但整体订单表现仍不及预期。
内销端出现边际改善信号。进入雪地胎排产期,各企业加大排产力度,对国内订单增量形成一定支撑。

然而,国内替换需求受消费降级、新能源车保有量提升带来换胎周期拉长等因素影响,整体增量受限,订单表现弱化。渠道前期储备库存高位,叠加市场看空预期不减,经销商备货谨慎,生产企业排产保守。
从产能利用率数据看,7月30日半钢胎样本企业产能利用率为63.98%,环比修复1.21个百分点,但同比仍下降6.00个百分点。
7月全月半钢胎产量约5077万条,环比下滑12.66%,同比下滑10.88%。产能利用率的环比回升,更多反映检修后的供给恢复,而非需求端的强劲扩张。
全钢胎:需求温和恢复,反弹空间受限
从全钢胎样本企业订单情况来看,整体稳中偏弱运行。出口订单方面,63%的全钢胎样本企业出口订单较上月稳定,33%的样本企业出口订单较上月减少,少量存增量预期。

非洲、中东、东南亚等地区订单仍相对较好,对整体形成支撑,但海外贸易摩擦仍存,限制整体增量。
内销端出现温和修复迹象。随着北方高温缓解、南方汛期逐步收尾,部分运输出车率回升,替换需求将温和修复。7月30日全钢胎样本企业产能利用率为63.80%;7月全月全钢胎产量1301万条,环比下滑1.66%,但同比增长2.04%。
然而,反弹空间受到明显制约。"车多货少"的现状依然存在,运价低迷抑制物流从业者的换胎意愿,全钢胎替换需求增量有限。

从库存端看,截至7月末,全钢胎样本企业成品库存周转天数约39.43天,半钢胎约45.56天。受控产影响,行业呈"被动去库"状态,周转天数环比改善,但绝对库存量仍处近年高位。
控产检修仍是短期常态
在这样的市场环境下,综合来看,企业控产、灵活检修的现状仍将持续。
根据隆众资讯对下周期产能利用率的预测调研显示,半钢胎样本中仅3.33%的企业存提升预期,10%的企业存下调预期,86.67%的企业表示开工平稳运行。

这一调研结果直观反映出企业的谨慎态度——在库存去化未取得实质性进展、出口订单未出现明确拐点之前,控产降负、灵活检修将是行业短期内的常态化操作。
对于轮胎企业而言,当前的核心矛盾不在供应端而在需求端。无论半钢的出口订单找回,还是全钢的替换需求修复,都需要时间。
在拐点到来之前,保持低库存、稳现金流,比盲目提产更为重要。


2026年上半年,我国汽车出口总量达531万辆,其中新能源汽车出口242万辆,同比增长70%。图为零跑B10、C10两款全球车型亮相2026印尼国际车展。
统计数据显示,2026年上半年,我国汽车出口总量达531万辆,同比增长53%;其中,新能源汽车出口242万辆,同比增长70%,进一步巩固了我国作为全球第一汽车出口大国的地位。
一方面,地缘政治风险推高全球油价,提升了中国新能源汽车的竞争力;另一方面,全球南方国家市场的持续扩容,让中国车企争相加速出海布局。对于志在挑战年销100万辆大关的零跑汽车来说,7月的成绩单更加印证了国内、国际双轮驱动的有效性。
据了解,零跑汽车国内市场7月交付101267台,同比翻倍,成为首个月销突破10万台的造车新势力。今年上半年,零跑汽车累计销售356487辆,同比增长约97%,是今年上半年唯一销量突破30万辆的新势力品牌。A10、B系列、C10、D19等车型多点开花,巩固了零跑汽车的增长根基。
近日,零跑携零跑B10及C10两款全球车型,亮相2026印尼国际车展,并正式宣布登陆印尼市场。零跑还与印尼Indomobil集团共同宣布,正式在印尼启动本地化KD组装生产,通过与Indomobil集团旗下PT National Assemblers深度合作,完成从产品输出到本地化全产业链布局的跨越。截至目前,零跑汽车已形成马来西亚、印尼双制造基地布局,成为东南亚少数拥有双KD产能的中国新能源品牌。
有分析认为,当前我国新能源汽车产业已形成“国内规模化托底,全球化增量扩容”的发展格局,二者不可偏废。例如,零跑率先突破10万台月销,标志造车新势力正式迈入主流车企量级,行业竞争从单一产品比拼,转向供应链、自研制造、渠道服务综合体系的长期较量。
近年来,中国新能源汽车出海已告别简单整车外销,转向“技术输出+本地建厂+生态共建”的全新阶段。据了解,依托与Stellantis、印尼Indomobil集团的三方协同,零跑采用品牌同店销售模式,借助当地成熟分销网络,计划年末建成50家印尼服务网点,覆盖售前、售后全链路。事实上,本地化生产不仅规避进口关税、缩短交付周期,还带动当地就业与配套产业链升级,契合东盟各国培育本土新能源产业的政策导向。截至目前,零跑海外业务共覆盖全球40余个国家和地区、2000余家门店,全球累计交付突破150万辆,东南亚本土化制造将成为其全球扩张关键支点。
“实践证明,零跑汽车正在成为中国新能源车企‘国内规模化、全球本土化’双轮驱动的典型样本。”独立汽车分析师白德认为,一方面,国内市场负责“造血、练兵、建产业链”,另一方面,国际市场负责“扩容、树标准、分风险”。只有用好国内、国际市场双轮驱动,才能让中国新能源汽车巩固全球领先优势,实现汽车产业高质量发展。
白德强调说,在取得规模化增长的基础上,中国新能源汽车必须持续加码技术创新。据透露,零跑汽车将在今年9月举办技术日,升级世界模型智驾系统,以低算力实现高阶智能驾驶普惠落地。
随着更多中国车企坚持技术立企,深耕前沿自研技术、完善产品矩阵、推进属地化产业布局,中国新能源产业的全球竞争优势将持续巩固,中国汽车产业升级与全球绿色交通转型进程也将进一步提速。

喺馬來西亞嘅 SUV 市場,好多人揀車嗰陣都會拿 Perodua Ativa 同 Chery Tiggo Cross 嚟做比較。呢兩款車喺價位同定位上都好接近,今日我哋就從多方面嚟做一個詳細嘅比較,幫你好省咗做功課嘅時間。
Perodua Ativa 喺馬來西亞嘅 OTR 售價係 RM 62,500 - 73,400,一共 3 個版本,包括 1.0L Turbo X(RM 62,500)、1.0L Turbo H(RM 67,300)、1.0L Turbo AV(RM 73,400) 等。
Chery Tiggo Cross 喺馬來西亞嘅 OTR 售價係 RM 88,750 - 99,750,一共 2 個版本,包括 2025 HEV 1.5L CSH(RM 99,750)、2025 1.5T Standard(RM 88,750) 等。
從價錢睇,Perodua Ativa 嘅起步價確實比 Chery Tiggo Cross 平咗 RM 26,250。如果你預算有限,Perodua 嘅入門版已經可以满足日常需要。但要留意,平嗰幾千蚊,喺配備上可能會有所取舍,具體就要睇你嘅需要。

Perodua Ativa 嘅安全評級係 5★ (ASEAN NCAP),主動安全系統包括 ASA 3.0 + ACC + LDA + LKA + BSM + RCTA。
Chery Tiggo Cross 嘅安全評級係 TBD,主動安全系統包括 Basic。
安全配備方面,兩款車都拿到唔錯嘅評級。不過 Perodua Ativa 嘅 ASA 3.0 + ACC + LDA + LKA + BSM + RCTA 同 Chery Tiggo Cross 嘅 Basic 喺功能上有啲分別,如果你比較重視主動安全嘅話,可以仔細比較下兩者嘅功能列表。

Perodua Ativa 採用 FWD 驅動方式。
Chery Tiggo Cross 採用 FWD 驅動方式。
兩款車嘅驅動方式一樣,都係 FWD,日常駕駛感受唔會有太大分別。

Perodua Ativa 保養 5 年/150,000km,保養間隔 每 10,000km 或 6 個月。
Chery Tiggo Cross 保養 3 年/100,000km,保養間隔 每 10,000km 或 6 個月。

Perodua Ativa 同 Chery Tiggo Cross 都係馬來西亞市場嘅主流選擇,適合家庭使用、日常通勤。如果你更重視品牌口碑同二手價,可以優先考慮口碑更好嗰一款;如果你更在乎性價比同配備,就揀配置更豐富嗰款。最後都係建議兩款都去試駕,親身體驗先係最重要嘅。

總而言之,Perodua Ativa 同 Chery Tiggo Cross 都係馬來西亞市場好唔錯嘅車型。揀邊一輛,關鍵都要睇你嘅個人需要同預算。建議大家做好功課,多比較幾間車行嘅報價,先去試駕做最終決定。買車係件大事,花點時間做功課絕對唔會錯。

In the Malaysian SUV market, many buyers compare Perodua Ativa and Chery Tiggo 7 Pro when selecting a car. These two cars are quite close in price and positioning. Today, we will make a detailed comparison from multiple aspects to save you time doing research.
Perodua Ativa OTR price in Malaysia is RM 62,500 - 73,400, there are 3 versions in total, including 1.0L Turbo X (RM 62,500), 1.0L Turbo H (RM 67,300), 1.0L Turbo AV (RM 73,400), etc.
Chery Tiggo 7 Pro OTR price in Malaysia is RM 123,750 - 123,750, there are 2 versions in total, including 1.6L Turbo Standard (RM 125,000), 1.6L Turbo Premium (RM 140,000), etc.
From the price perspective, Perodua Ativa's starting price is indeed RM 61,250 cheaper than Chery Tiggo 7 Pro. If your budget is limited, Perodua's entry-level version can already meet daily needs. However, note that the few thousand cheaper amount might have trade-offs in specifications, depends on your needs.

Perodua Ativa comes with 1.5L 4-cyl, 105 hp. Official fuel consumption 6.0 L/100km.
Chery Tiggo 7 Pro comes with 1.5L Turbo, 140 hp. Official fuel consumption 7.0 L/100km.
In terms of power, Chery Tiggo 7 Pro's 1.5L Turbo has 35 hp more than Perodua Ativa's 1.5L 4-cyl. However, for daily city driving, the power of both cars is sufficient, you won't feel lacking in power.

Perodua Ativa body length 4400 mm, trunk 400 L.
Chery Tiggo 7 Pro body length 4400 mm, trunk 400 L.
The dimensions of the two cars are almost the same, interior space difference is not significant. For this level of car, daily use is completely sufficient.

Perodua Ativa warranty 5 years/150,000km, maintenance interval every 10,000km or 6 months.
Chery Tiggo 7 Pro warranty 3 years/100,000km, maintenance interval every 10,000km or 6 months.
Overall, Perodua Ativa and Chery Tiggo 7 Pro are both quite good models in the Malaysian market. Which one to choose depends on your personal needs and budget. We recommend doing your research, compare quotes from several dealerships, and test drive before making a final decision. Buying a car is a major matter, spending some time doing research will never be wrong.

In Malaysia's SUV market, many buyers compare Perodua Aruz and Honda HR-V when choosing a car. These two cars are quite close in price and positioning. Today we will do a detailed comparison from multiple aspects to help you save time doing research.
The OTR price of Perodua Aruz in Malaysia is RM 72,900 - 77,900, with a total of 2 versions, including 1.5L X (RM 72,900), 1.5L AV (RM 77,900), etc.
The OTR price of Honda HR-V in Malaysia is RM 115,900 - 143,900, with a total of 4 versions, including 2026 e:HEV 1.5L RS (RM 143,900), 2026 1.5T V (RM 137,900), 2026 1.5T E (RM 130,900), etc.
From a price perspective, Perodua Aruz's starting price is indeed RM 43,000 cheaper than Honda HR-V. If your budget is limited, Perodua's entry-level version is already sufficient for daily needs. However, note that the cheaper few thousand may involve compromises in features, depending on your specific requirements.

Perodua Aruz is equipped with 1.5L 4-cyl, 105 hp power. Official fuel consumption 6.0 L/100km.
Honda HR-V is equipped with 1.5L Turbo, 140 hp power. Official fuel consumption 7.0 L/100km.
In terms of power, Honda HR-V's 1.5L Turbo has 35 more horsepower than Perodua Aruz's 1.5L 4-cyl. However, for daily city driving, the power of both cars is sufficient and won't feel lacking.

Perodua Aruz body length is 4400 mm, trunk 400 L.
Honda HR-V body length is 4500 mm, trunk 450 L.
In terms of space, Honda HR-V's body is 100 mm longer than Perodua Aruz, offering an advantage in seating space. However, Perodua Aruz is more flexible for parking in the city, each has its trade-offs.

Perodua Aruz warranty 5 years/150,000km, maintenance interval every 10,000km or 6 months.
Honda HR-V warranty 5 years/unlimited mileage, maintenance interval every 10,000km or 6 months.

Overall, both Perodua Aruz and Honda HR-V are very good models in the Malaysian market. Choosing which one depends mainly on your personal needs and budget. We recommend doing your research, comparing quotes from several dealerships, and test driving before making a final decision. Buying a car is a big matter, spending some time on research will never be wrong.

Pada pasaran SUV di Malaysia, ramai pembeli semasa memilih kereta akan membandingkan Proton X70 dan Chery Tiggo 8 PHEV. Kedua-dua kereta ini mempunyai harga dan kedudukan yang agak hampir, hari ini kita akan membuat perbandingan terperinci dari pelbagai sudut untuk membantu anda menjimatkan masa membuat kajian.
Harga OTR Proton X70 di Malaysia ialah RM 106,800 - 122,300, terdapat sebanyak 3 varian, termasuk 1.5L Standard 2WD (RM 106,800), 1.5L Executive 2WD (RM 115,800), 1.5L Premium 2WD (RM 122,300) dan lain-lain.
Harga OTR Chery Tiggo 8 PHEV di Malaysia ialah RM 159,750 - 159,750, terdapat sebanyak 2 varian, termasuk 1.6L Turbo Standard (RM 130,000), 1.6L Turbo Premium (RM 145,000) dan lain-lain.
Dari segi harga, harga permulaan Proton X70 memang lebih murah RM 52,950 berbanding Chery Tiggo 8 PHEV. Jika anda mempunyai bajet terhad, varian permulaan Proton sudah boleh memenuhi keperluan harian. Namun perlu diingat, berbeza beberapa ribu ringgit, mungkin ada pilihan dalam kelengkapan, ia bergantung pada keperluan anda.
Proton X70 dilengkapi dengan 1.5L Turbo, kuasa 140 hp. Penggunaan bahan api rasmi 7.0 L/100km.
Chery Tiggo 8 PHEV dilengkapi dengan Hybrid, kuasa 170 hp. Penggunaan bahan api rasmi 4.5 L/100km.
Dari segi tenaga, Hybrid Chery Tiggo 8 PHEV mempunyai 30 hp lebih berbanding 1.5L Turbo Proton X70. Walau bagaimanapun, untuk memandu harian dalam bandar, kuasa kedua-dua kereta ini cukup, anda tidak akan merasa kurang bertenaga.
Penilaian keselamatan Proton X70 ialah 5★ (ASEAN NCAP), sistem keselamatan aktif termasuk ADAS (ACC, AEB, LKA, LDA, BSM, RCTA).
Penilaian keselamatan Chery Tiggo 8 PHEV ialah TBD, sistem keselamatan aktif termasuk Asas.
Dari segi kelengkapan keselamatan, kedua-dua kereta mendapat penilaian yang baik. Walau bagaimanapun, ADAS (ACC, AEB, LKA, LDA, BSM, RCTA) Proton X70 dan Asas Chery Tiggo 8 PHEV mempunyai perbezaan dari segi fungsi, jika anda lebih menekankan keselamatan aktif, boleh dibandingkan secara terperinci senarai fungsi kedua-duanya.
Proton X70 menggunakan cara pemacu FWD.
Chery Tiggo 8 PHEV menggunakan cara pemacu FWD.
Kedua-dua kereta mempunyai cara pemacu yang sama, iaitu FWD, perasaan memandu harian tidak akan ada perbezaan besar.
Proton X70 dan Chery Tiggo 8 PHEV adalah pilihan utama di pasaran Malaysia, sesuai untuk kegunaan keluarga dan perjalanan harian. Jika anda lebih menekankan reputasi jenama dan harga terpakai, boleh utamakan terlebih dahulu mana yang mempunyai reputasi lebih baik; jika anda lebih mementingkan keberbalikan kos dan kelengkapan, maka pilih yang lebih kaya dengan konfigurasi. Pada akhirnya disarankan untuk mencuba memandu kedua-duanya, pengalaman sendiri adalah yang paling penting.
Secara keseluruhan, Proton X70 dan Chery Tiggo 8 PHEV adalah model kereta yang sangat baik di pasaran Malaysia. Memilih mana satu, yang utama adalah bergantung pada keperluan bajet peribadi anda. Kami syorkan anda membuat kajian terlebih dahulu, bandingkan beberapa tawaran dari beberapa dealer, kemudian buat keputusan akhir selepas memandu ujian. Membeli kereta adalah perkara penting, meluangkan masa membuat kajian sama sekali tidak akan salah.
In Malaysia's SUV market, many buyers compare Perodua Aruz and Toyota Corolla Cross when choosing a car. These two models are quite similar in price and positioning. Today, we will make a detailed comparison from multiple aspects to help you save time on research.
The OTR price of Perodua Aruz in Malaysia is RM 72,900 - 77,900, with a total of 2 versions, including 1.5L X (RM 72,900), 1.5L AV (RM 77,900), etc.
The OTR price of Toyota Corolla Cross in Malaysia is RM 133,800 - 148,800, with a total of 3 versions, including 2026 HEV 1.8L GR Sport (RM 148,800), 2026 HEV 1.8L Standard (RM 140,800), 2026 1.8L Standard (RM 133,800), etc.
In terms of price, the starting price of Perodua Aruz is indeed RM 60,900 cheaper than Toyota Corolla Cross. If your budget is limited, Perodua's entry-level version can already meet daily needs. But note that the few thousand cheaper might involve trade-offs in features, depending on your specific needs.

Perodua Aruz safety rating is 5★ (ASEAN NCAP), active safety systems include .
Toyota Corolla Cross safety rating is 5★ (ASEAN NCAP), active safety systems include TSS (PCS, LDA, ACC, LTA).
Both cars have the same safety rating, and safety features are quite comprehensive in this class. New cars nowadays generally have good safety, so no need to worry too much about this point.

Perodua Aruz body length 4400 mm, trunk 400 L.
Toyota Corolla Cross body length 4400 mm, trunk 400 L.
Both cars have almost identical dimensions, and the interior space difference is not significant. For this class of cars, it is completely sufficient for daily use.

Perodua Aruz warranty 5 years/150,000km, maintenance interval every 10,000km or 6 months.
Toyota Corolla Cross warranty 5 years/unlimited mileage, maintenance interval every 10,000km or 6 months.

Both Perodua Aruz and Toyota Corolla Cross are mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale value more, you can prioritize the one with better reputation; if you care more about cost-performance ratio and features, choose the one with richer configuration. Ultimately, it is suggested to test drive both, as experiencing them personally is the most important.

Overall, both Perodua Aruz and Toyota Corolla Cross are quite good models in the Malaysian market. Which one to choose depends mainly on your personal needs and budget. It is recommended to do your research, compare quotes from several dealerships, and then test drive to make the final decision. Buying a car is a big matter, spending some time researching will definitely not be wrong.

In Malaysia's SUV market, many buyers compare the Proton X70 and Chery Tiggo Cross when choosing a car. These two models are quite close in price and positioning. Today, we will make a detailed comparison from multiple aspects to help you save time on research.
The OTR price for the Proton X70 in Malaysia is RM 106,800 - 122,300. There are 3 versions in total, including 1.5L Standard 2WD (RM 106,800), 1.5L Executive 2WD (RM 115,800), 1.5L Premium 2WD (RM 122,300), etc.
The OTR price for the Chery Tiggo Cross in Malaysia is RM 88,750 - 99,750. There are 2 versions in total, including 2025 HEV 1.5L CSH (RM 99,750), 2025 1.5T Standard (RM 88,750), etc.
In terms of price, the starting price of the Chery Tiggo Cross is RM 18,050 cheaper than the Proton X70. To be honest, at this price range, a difference of a few thousand isn't really significant. The key is to look at the overall value for money and long-term ownership costs.

The Proton X70 is equipped with a 1.5L Turbo, producing 140 hp. Official fuel consumption is 7.0 L/100km.
The Chery Tiggo Cross is equipped with a 1.5L 4-cyl, producing 105 hp. Official fuel consumption is 6.0 L/100km.
In terms of power, the Proton X70's 1.5L Turbo has 35 more horsepower than the Chery Tiggo Cross's 1.5L 4-cyl, offering more confidence in mid-range acceleration, especially when overtaking on highways. However, the Chery Tiggo Cross may have better fuel consumption, and the difference in daily city commuting is not significant.

The Proton X70 body length is 4400 mm, trunk 400 L.
The Chery Tiggo Cross body length is 4400 mm, trunk 400 L.
The dimensions of both cars are almost the same, with little difference in interior space. For a car of this class, it is more than enough for daily use.

Both the Proton X70 and Chery Tiggo Cross are mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale price more, you can prioritize the one with better reputation; if you care more about value for money and features, choose the one with richer configurations. Ultimately, it is recommended to test drive both models, as personal experience is the most important.
Overall, both the Proton X70 and Chery Tiggo Cross are quite good models in the Malaysian market. Choosing which one depends on your personal needs and budget. We suggest doing your research, comparing quotes from multiple car dealerships, and then test driving before making a final decision. Buying a car is a big matter; spending some time doing research will never be wrong.

In the Malaysian SUV market, many buyers compare Proton X70 and Chery Tiggo Cross when choosing a car. These two models are quite close in price and positioning. Today, we will make a detailed comparison from multiple aspects to help you save time doing research.
Proton X70 has an OTR price in Malaysia of RM 106,800 - 122,300, with a total of 3 versions, including 1.5L Standard 2WD (RM 106,800), 1.5L Executive 2WD (RM 115,800), 1.5L Premium 2WD (RM 122,300), etc.
Chery Tiggo Cross has an OTR price in Malaysia of RM 88,750 - 99,750, with a total of 2 versions, including 2025 HEV 1.5L CSH (RM 99,750), 2025 1.5T Standard (RM 88,750), etc.
From a price perspective, Chery Tiggo Cross is RM 18,050 cheaper than Proton X70 in terms of starting price. To be honest, in this price range, a difference of a few thousand isn't really that big, the key is to look at overall value for money and long-term usage costs.

Proton X70 has a safety rating of 5★ (ASEAN NCAP), with active safety systems including ADAS (ACC, AEB, LKA, LDA, BSM, RCTA).
Chery Tiggo Cross has a safety rating of TBD, with active safety systems including Basic.
Regarding safety features, both cars have received good ratings. However, there are some differences in functionality between Proton X70's ADAS (ACC, AEB, LKA, LDA, BSM, RCTA) and Chery Tiggo Cross's Basic. If you value active safety, you can compare the feature lists of both in detail.

Proton X70 warranty is 5 years/150,000km, maintenance interval every 10,000km or 6 months.
Chery Tiggo Cross warranty is 3 years/100,000km, maintenance interval every 10,000km or 6 months.

Proton X70 and Chery Tiggo Cross are both mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale value more, you can prioritize the one with better reputation; if you care more about cost-performance and features, then choose the one with richer configurations. Ultimately, it is recommended to test drive both models, as personal experience is the most important.
Overall, Proton X70 and Chery Tiggo Cross are both very good models in the Malaysian market. Which one to choose depends mainly on your personal needs and budget. It is recommended to do your homework, compare quotes from several car dealerships, and then test drive to make the final decision. Buying a car is a big deal, and taking the time to do research is never a mistake.

喺馬來西亞嘅 SUV 市場,好多買家喺揀車嘅時候都會將 Perodua Aruz 同 Chery Tiggo 8 拿嚟比較。呢兩部車喺價位同定位上都好接近,今日我哋就從多個方面做一個詳細嘅對比,幫你節省做功課嘅時間。
Perodua Aruz 喺馬來西亞嗰個 OTR 售價係 RM 72,900 - 77,900,總共有 2 個版本,包括 1.5L X(RM 72,900)、1.5L AV(RM 77,900) 等。
Chery Tiggo 8 喺馬來西亞嗰個 OTR 售價係 RM 129,750 - 129,750,總共有 1 個版本,包括 2026 1.6T Standard(RM 129,750) 等。
睇返價錢,Perodua Aruz 嘅起步價真係比 Chery Tiggo 8 便宜咗 RM 56,850。如果你預算唔夠多,Perodua 嘅入門版已經可以滿足日常需求。但都要注意,平嗰幾千蚊,可能喺配備上會有取舍,具體就要睇你嘅需求。

Perodua Aruz 車身長 4400 mm,後備箱 400 L。
Chery Tiggo 8 車身長 4400 mm,後備箱 400 L。
呢兩部車嘅尺寸差唔多一樣,車內空間差別唔大。呢個級別嘅車,日常使用完全夠用。

Perodua Aruz 採用 FWD 驅動方式。
Chery Tiggo 8 採用 FWD 驅動方式。
呢兩部車嘅驅動方式一樣,都係 FWD,日常駕駛感覺唔會有太大分別。

Perodua Aruz 同 Chery Tiggo 8 都係馬來西亞市場嘅主流選擇,適合家庭使用、日常通勤。如果你更重視品牌口碑同二手價,可以優先考慮口碑更好嗰一款;如果你更在意性價比同配備,那就揀配置更豐富嗰款。最終都係建議兩部都去試駕,親身體驗先係最緊要。

總括嚟講,Perodua Aruz 同 Chery Tiggo 8 都係馬來西亞市場幾唔錯嘅車型。揀邊輛,關鍵都係睇你嘅個人需求同預算。建議大家做好功課,多比較幾間車行嘅報價,再去試駕做最終決定。買車係件大事,花少少時間做功課絕對唔會錯。

喺馬來西亞嘅 SUV 市場,好多買家喺揀車嘅時候都會拿 Perodua Aruz 同 Chery Tiggo 7 PHEV 嚟做比較。這兩款車喺價位同定位上都好接近,今日我哋就從多方面做一個詳細嘅對比,幫你省返做功課嘅時間。
Perodua Aruz 喺馬來西亞嘅 OTR 售價係 RM 72,900 - 77,900,一共有 2 個版本,包括 1.5L X(RM 72,900)、1.5L AV(RM 77,900)等。
Chery Tiggo 7 PHEV 喺馬來西亞嘅 OTR 售價係 RM 129,750 - 129,750,一共有 2 個版本,包括 2025 1.5T 90km CSH(RM 129,750)、Tiggo 7 PHEV 支援咩充電方法?可唔可以用家用電源插座充電?(RM 117,478)等。
由價錢睇,Perodua Aruz 嘅起步價確實比 Chery Tiggo 7 PHEV 平咗 RM 56,850。如果你預算有限,Perodua 嘅入門版已經可以滿足日常需求。但都要留意,平嗰幾千蚊,可能喺配備上會有取舍,具體要看你嘅需求。

Perodua Aruz 搭載 1.5L 4-cyl,馬力 105 hp。官方油耗 6.0 L/100km。
Chery Tiggo 7 PHEV 搭載 Hybrid,馬力 170 hp。官方油耗 4.5 L/100km。
動力方面,Chery Tiggo 7 PHEV 嘅 Hybrid 比 Perodua Aruz 嘅 1.5L 4-cyl 多出 65 匹馬力。不過日常喺市區開,兩款車嘅動力都夠用,唔覺得唔夠力。

Perodua Aruz 保修 5 年/150,000km,保養間隔 每 10,000km 或 6 個月。
Chery Tiggo 7 PHEV 保修 3 年/100,000km,保養間隔 每 10,000km 或 6 個月。

Perodua Aruz 同 Chery Tiggo 7 PHEV 都係馬來西亞市場嘅主流選擇,適合家庭使用、日常通勤。如果你更睇重品牌口碑同二手價,可以優先考慮口碑更好嗰款;如果你更關注性價比同配備,那就選配置更豐富嗰款。最終都建議兩款都去試駕,親身體驗先係最重要。

整體嚟講,Perodua Aruz 同 Chery Tiggo 7 PHEV 都係馬來西亞市場好唔錯嘅車型。揀邊一輛,關鍵仲係要睇你嘅個人需求同預算。建議大家做足功課,多比較幾間車行嘅報價,再嚟試駕做最終決定。買車係大件事,花啲時間做功課絕對唔會錯。

喺馬來西亞嘅 SUV 市場,好多人揀車嘅時候都拿 Proton X70 同 Chery Tiggo Cross 做比較。呢兩款車喺價錢同定位上都幾接近,今日我哋就由多個方面做詳細比較,幫你省返做功課嘅時間。
Proton X70 喺馬來西亞嘅 OTR 售價係 RM 106,800 - 122,300,一共有 3 個版本,包括 1.5L Standard 2WD(RM 106,800)、1.5L Executive 2WD(RM 115,800)、1.5L Premium 2WD(RM 122,300) 等。
Chery Tiggo Cross 喺馬來西亞嘅 OTR 售價係 RM 88,750 - 99,750,一共有 2 個版本,包括 2025 HEV 1.5L CSH(RM 99,750)、2025 1.5T Standard(RM 88,750) 等。
由價錢睇,Chery Tiggo Cross 嘅起步價比 Proton X70 平咗 RM 18,050。坦白講,喺呢個價錢段,幾千蚊嘅差距其實唔算大,關鍵仲係睇整體嘅性價比同長期使用成本。

Proton X70 車身長 4400 mm,行李廂 400 L。
Chery Tiggo Cross 車身長 4400 mm,行李廂 400 L。
兩部車嘅尺寸幾乎一樣,車內空間差別唔大。呢個級別嘅車,日常使用完全夠用。

Proton X70 採用 FWD 驅動方式。
Chery Tiggo Cross 採用 FWD 驅動方式。
兩部車嘅驅動方式一樣,都係 FWD,日常駕駛感受唔會有太大分別。

Proton X70 同 Chery Tiggo Cross 都係馬來西亞市場嘅主流選擇,適合家庭使用、日常通勤。如果你更睇重品牌口碑同二手價,可以優先考慮口碑更好嗰款;如果你更在意性價比同配備,就揀配置更豐富嗰款。最終仲係建議兩部車都去試駕,親身體驗先係最重要嘅。
總括嚟講,Proton X70 同 Chery Tiggo Cross 都係馬來西亞市場好唔錯嘅車型。揀邊一部,關鍵仲係睇你嘅個人需求同預算。建議大家做好功課,多比較幾間車行嘅報價,再去試駕先做最終決定。買車係件大事,花少少時間做功課絕對唔會錯。

In the Malaysian SUV market, many buyers compare Perodua Aruz and MG MG HS when choosing a car. These two cars are quite close in price and positioning, so today we will do a detailed comparison from multiple aspects to help you save time on research.
The Perodua Aruz OTR price in Malaysia is RM 72,900 - 77,900, with a total of 2 versions, including 1.5L X (RM 72,900), 1.5L AV (RM 77,900) etc.
The MG MG HS OTR price in Malaysia is RM 130,450 - 146,450, with a total of 2 versions, including 1.5L Standard (RM 105,000), 1.5L Executive (RM 115,000) etc.
In terms of price, Perodua Aruz's starting price is indeed RM 57,550 cheaper than MG MG HS. If your budget is limited, Perodua's entry-level version is already sufficient for daily needs. But be aware that the cheaper few thousand might involve trade-offs in features, depending on your needs.

Perodua Aruz is equipped with a 1.5L 4-cyl, 105 hp. Official fuel consumption is 6.0 L/100km.
MG MG HS is equipped with a 1.5L Turbo, 140 hp. Official fuel consumption is 7.0 L/100km.
In terms of power, MG MG HS's 1.5L Turbo has 35 more horsepower than Perodua Aruz's 1.5L 4-cyl. However, for daily city driving, both cars have sufficient power and won't feel lacking.

Perodua Aruz adopts FWD drive type.
MG MG HS adopts FWD drive type.
Both cars have the same drive type, which is FWD, so there won't be much difference in daily driving experience.

Perodua Aruz warranty is 5 years/150,000km, service interval every 10,000km or 6 months.
MG MG HS warranty is 7 years/150,000km, service interval every 10,000km or 6 months.
Perodua Aruz and MG MG HS are both mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale value more, prioritize the one with the better reputation; if you care more about cost-performance and features, choose the one with richer features. In the end, it is recommended to test drive both; personal experience is the most important.
Overall, Perodua Aruz and MG MG HS are both very good car models in the Malaysian market. Which one to choose mainly depends on your personal needs and budget. We recommend doing research, comparing quotes from several dealerships, and then test driving to make a final decision. Buying a car is a big matter, spending time on research will never be wrong.

In Malaysia's SUV market, many buyers compare Perodua Aruz and Mitsubishi Xforce when choosing a car. These two cars are quite close in price and positioning. Today, we will make a detailed comparison from multiple aspects to help you save time on research.
The OTR price of Perodua Aruz in Malaysia is RM 72,900 - 77,900, with a total of 2 variants, including 1.5L X (RM 72,900), 1.5L AV (RM 77,900), etc.
The OTR price of Mitsubishi Xforce in Malaysia is RM 109,930 - 119,930, with a total of 2 variants, including 2026 1.5L Ultimate (RM 119,930), 2026 1.5L Urban (RM 109,930), etc.
From a price perspective, the starting price of Perodua Aruz is indeed RM 37,030 cheaper than Mitsubishi Xforce. If your budget is limited, Perodua's entry-level version can already meet daily needs. However, note that the few thousand ringgit difference might involve trade-offs in features, depending on your specific requirements.

Perodua Aruz is equipped with a 1.5L 4-cyl, 105 hp. Official fuel consumption 6.0 L/100km.
Mitsubishi Xforce is equipped with a 1.5L Turbo, 140 hp. Official fuel consumption 7.0 L/100km.
In terms of power, the 1.5L Turbo on Mitsubishi Xforce has 35 more horsepower than the 1.5L 4-cyl on Perodua Aruz. However, for daily city driving, both cars have sufficient power and won't feel underpowered.

Perodua Aruz's safety rating is 5★ (ASEAN NCAP), active safety systems include.
Mitsubishi Xforce's safety rating is 5★ (ASEAN NCAP), active safety systems include MI-PILOT.
Both cars have the same safety rating. In this class, safety features are quite comprehensive. New car safety is generally not bad nowadays, so there is no need to worry too much about this.

Perodua Aruz warranty is 5 years/150,000km, maintenance interval every 10,000km or 6 months.
Mitsubishi Xforce warranty is 3 years/100,000km, maintenance interval every 10,000km or 6 months.

Both Perodua Aruz and Mitsubishi Xforce are mainstream choices in the Malaysian market, suitable for family use and daily commuting. If you value brand reputation and resale value more, consider the one with better reputation first; if you care more about cost-performance ratio and features, choose the one with more configurations. Ultimately, it is recommended to test drive both, as the personal experience is the most important.

Overall, Perodua Aruz and Mitsubishi Xforce are both very good car models in the Malaysian market. Which one to choose mainly depends on your personal needs and budget. We recommend doing your research, comparing quotes from multiple car dealerships, and then test driving to make the final decision. Buying a car is a big matter, and taking some time to research will definitely not be a mistake.

Dalam pasaran SUV di Malaysia, ramai pembeli membandingkan Proton X70 dan Mazda CX-60 semasa memilih kereta. Kedua-dua kereta ini hampir sama dalam harga dan kedudukan pasaran, hari ini kita akan membuat perbandingan terperinci dari pelbagai aspek, membantu anda menjimatkan masa untuk membuat kajian.
Harga OTR Proton X70 di Malaysia ialah RM 106,800 - 122,300, terdapat 3 varian, termasuk 1.5L Standard 2WD (RM 106,800), 1.5L Executive 2WD (RM 115,800), 1.5L Premium 2WD (RM 122,300) dan lain-lain.
Harga OTR Mazda CX-60 di Malaysia ialah RM 200,510 - 252,873, terdapat 2 varian, termasuk 2026 3.3T 4WD High Plus (RM 252,873), 2025 2.5L 2WD High (RM 200,510) dan lain-lain.
Dari segi harga, harga permulaan Proton X70 memang lebih murah RM 93,710 berbanding Mazda CX-60. Jika bajet anda terhad, varian asas Proton sudah boleh memenuhi keperluan harian. Tetapi ambil perhatian, beberapa ribu ringgit yang lebih murah itu, mungkin ada kompromi pada kelengkapan, bergantung pada keperluan anda.

Penilaian keselamatan Proton X70 ialah 5★ (ASEAN NCAP), sistem keselamatan aktif termasuk ADAS (ACC, AEB, LKA, LDA, BSM, RCTA).
Penilaian keselamatan Mazda CX-60 ialah 5★ (Euro NCAP), sistem keselamatan aktif termasuk i-Activsense Pro.
Dari aspek kelengkapan keselamatan, kedua-dua kereta mendapat penilaian yang bagus. Walau bagaimanapun, ADAS Proton X70 (ACC, AEB, LKA, LDA, BSM, RCTA) dan i-Activsense Pro Mazda CX-60 mempunyai perbezaan fungsi. Jika anda lebih mengutamakan keselamatan aktif, anda boleh membandingkan senarai fungsi kedua-duanya dengan teliti.

Panjang badan Proton X70 4400 mm, bak muatan 400 L.
Panjang badan Mazda CX-60 4500 mm, bak muatan 450 L.
Dalam aspek ruang, badan Mazda CX-60 lebih panjang 100 mm berbanding Proton X70, ruang penumpang lebih unggul. Namun, Proton X70 lebih fleksibel untuk diparkir di bandar, masing-masing ada kompromi.

Proton X70 dan Mazda CX-60 adalah pilihan utama pasaran Malaysia, sesuai untuk kegunaan keluarga dan perjalanan harian. Jika anda lebih mengutamakan reputasi jenama dan harga kenderaan terpakai, utamakan model yang mempunyai reputasi lebih baik; jika anda lebih mengutamakan nilai dan kelengkapan, pilih yang mempunyai kelengkapan lebih kaya. Akhir sekali disyorkan kedua-dua model untuk diuji jalan, pengalaman langsung adalah yang paling penting.
Secara keseluruhannya, Proton X70 dan Mazda CX-60 adalah model kereta yang sangat baik di pasaran Malaysia. Memilih mana-mana, penting bergantung pada keperluan dan bajet peribadi anda. Disyorkan membuat kajian dahulu, bandingkan beberapa tawaran diler, kemudian uji jalan untuk membuat keputusan akhir. Membeli kereta adalah perkara besar, meluangkan masa untuk membuat kajian pasti tidak salah.

三百萬。呢唔係一個簡單嘅銷量數字。
當五菱代步車用戶即將突破三百萬嘅時候,呢件事嘅意義已經遠遠超過咗賣咗幾多台車。佢更像一個信號,告訴整間行業,代步車呢個賽道,已經從一個邊緣市場,變成咗一個真正有規模、有用戶、有生態嘅成熟品類。
而五菱,正係呢個品類嘅定義者。

將一件簡單嘅事,做到別人都追唔到
好多人睇五菱嘅代步車,會覺得就係平仔。但真正明嘅人都知道,五菱做嘅從來都唔係簡單嘅仔。
從寶駿 E100 開始,到宏光 MINIEV,再到繽果家族,五菱一直喺做一件事。將代步呢件事,做到極致嘅簡單。
簡單到咩程度。靚,易開,易泊,慳。就呢八個字。
但就係呢八個字,背後係對用戶需求最深刻嘅理解。

大學生嘅第一部車,職場新人嘅通勤工具,年輕家庭嘅第二部車,成熟家庭嘅代步首選。呢啲場景睇落嚟零散,但本質上都係同一個需求。用最低嘅成本,解決最日常嘅出行問題。
五菱抓住咗呢個需求。而且一做就係九年。
從二零一七年到而家,九年時間,五菱一直喺代步車呢個賽道入面深耕。冇跟風去做啲看起來更高級嘅嘢,而係將一件簡單嘅事,做到咗別人追唔到嘅程度。
宏光 MINIEV 連續七十一個月拿到國內 A00 級純電銷量冠軍,累計收穫超過一百九十五萬用戶。繽果家族都有超過七十五萬車主。呢兩個數字加埋,就係三百萬嘅底氣。
三百萬用戶,係三百萬份信任
三百萬用戶,對任何一個品牌嚟講,都係一筆巨大嘅資產。
但對五菱嚟講,呢三百萬用戶嘅意義,仲唔止係呢。
五菱呢個品牌,一直有一個好特別嘅地方。佢同用戶之間嘅關係,唔係簡單嘅買賣關係。更像一種互相成就嘅關係。
人民想要乜,五菱就做乜。呢句說話好多人都聽過。但真正明嘅人唔多。
佢嘅意思唔係話五菱咩都做。而係話五菱永遠站喺用戶嘅角度,去諗住用戶真正需要嘅係咩。
代步車就係最好嘅例子。
喺宏光 MINIEV 出世之前,市面上唔係冇細車。但嗰啲細車,要么太貴,要么太醜,要么就係根本唔好用。
五菱做嘅嘢,就係將呢啲問題一個一個解決咗。然後用一個所有人都能接受嘅價格,將一台真正好用嘅代步車,交到用戶手裡。

呢種做法積落嚟嘅,就係用戶嘅信任。
三百萬用戶,就係三百萬份信任。呢種信任,係花幾多錢都買唔到嘅。
而且更重要嘅係,呢三百萬用戶,唔係沉默嘅用戶。佢哋係會玩、會創造、會分享嘅用戶。
宏光 MINIEV 點解能咁紅。好大一個原因,就係用戶自己在玩。改色,改裝,潮創,各種玩法層出不窮。
用戶把車當咗做一個表達自己嘅平台。而五菱,畀咗佢哋呢個平台。
呢種品牌同用戶之間嘅互動,先係最珍貴嘅。
代步車出海,走嘅係另一條路
五菱代步車做到三百萬,對整間行業嚟講,都係一件大事。
首先,佢重新定義咗代步車呢個品類嘅價值。
喺好多人眼裡,代步車就係低階車,就係平嘢。但五菱用三百萬用戶告訴所有人,代步車係一個真正有規模、有需求、有未來嘅賽道。
而且呢個賽道,唔只係喺中國有市場。
第五代宏光 MINIEV 已經喺印尼正式上架咗。呢就意味著,五菱嘅代步車,正走向全球。

呢件事嘅意義,比好多人想像嘅都要大。
中國汽車出海,以前都係靠性價比。但五菱嘅代步車出海,靠嘅唔只係性價比。佢靠嘅係一套成熟嘅產品邏輯,一套對用戶需求嘅深刻理解。
簡單代步呢個需求,唔只係中國人有。全世界嘅人都有。
只要呢個需求存在,五菱嘅代步車就有市場。
而且今次喺印尼,五菱仲同迪士尼皮克斯嘅玩具總動員 5 做咗跨界聯動。這說明咩。說明五菱嘅品牌,正變得越來越年輕,越來越國際化。
從一個中國嘅國民品牌,到一個全球嘅代步車品牌。五菱正行一條別人冇行過嘅路。
三百萬,只係一個新嘅起點
八月七日,成都露天音樂公園。
宏光 MINIEV 六週年暨五菱代步車三百萬用戶盛典,就要喺呢裡舉行。
近百台用戶潮創車齊聚現場,五菱車主代表共赴呢場盛宴。繽果家族全球代言人孟子義都會親臨現場。
呢係一場屬於用戶嘅派對。都係一個屬於五菱嘅里程碑。
三百萬,唔係終點。佢只係一個新嘅起點。
代步車呢個賽道,仲有唔少空間。五菱嘅故事,仲遠遠冇講完。
我哋只需要等著睇。接下來,五菱仲會給我哋帶來咩樣嘅驚喜。

喺馬來西亞嘅 SUV 市場,好多買家喺揀車嗰陣都會拿 Proton X50 同 Toyota Yaris Cross 做比較。呢兩款車喺價碼同定位上都幾接近,今日我哋就由多個方面做一個詳細對比,幫你省下做功課嘅時間。
Proton X50 喺馬來西亞嘅 OTR 售價係 RM 89,800 - 113,300,一共有 4 個版本,包括 1.5T Executive(RM 89,800)、1.5T Premium(RM 101,800)、1.5T Flagship(RM 113,300) 等。
Toyota Yaris Cross 喺馬來西亞嘅 OTR 售價係 RM 99,900 - 109,900,一共有 2 個版本,包括 2026 1.5L Standard(RM 99,900)、2026 HEV 1.5L Standard(RM 109,900) 等。
由價錢嚟睇,Proton X50 嘅起步價確實比 Toyota Yaris Cross 平咗 RM 10,100。如果你預算有限,Proton 嘅入門版已經可以滿足日常需求。但都要注意,平嗰幾千蚊,可能喺配備上會有取捨,具體要看你嘅需求。

Proton X50 搭載 1.5L 4-cyl,馬力 105 hp。官方油耗 6.0 L/100km。
Toyota Yaris Cross 搭載 1.5L 4-cyl,馬力 105 hp。官方油耗 6.0 L/100km。
兩款車用緊同一套動力系統,日常開起嚟嘅感覺基本冇分別。油耗方面都差唔多,唔使太糾結這一點。

Proton X50 嘅安全評級係 5★ (ASEAN NCAP),主動安全系統包括 ADAS (ACC, AEB, LKA, LDA, BSM, RCTA)。
Toyota Yaris Cross 嘅安全評級係 5★ (ASEAN NCAP),主動安全系統包括 TSS。
兩款車嘅安全評級一樣,喺呢個級別入面安全配備都算畀得好齊全。而家嘅新車安全性都唔差,唔使太擔心這一點。

Proton X50 採用 4WD 驅動方式。
Toyota Yaris Cross 採用 FWD 驅動方式。
Proton 嘅 4WD 同 Toyota 嘅 FWD 喺操控上會有唔同感覺,建議試駕對比。

總體嚟講,Proton X50 同 Toyota Yaris Cross 都係馬來西亞市場好唔錯嘅車型。揀邊一輛,關鍵都要睇你嘅個人需求同預算。建議大家做好功課,多比較幾間車行嘅報價,再去試駕做最終決定。買車係件大事,花少少時間做功課絕對唔會錯。

喺馬來西亞嘅 SUV 市場,好多買家喺揀車嗰陣都會拿 Proton X50 同 Toyota Corolla Cross 嚟比較。這兩款車喺價位同定位上幾接近,今日我哋就係多個方面做一個詳細嘅對比,幫你攞翻做功課嘅時間。
Proton X50 喺馬來西亞嘅 OTR 售價係 RM 89,800 - 113,300,總共有 4 個版本,包括 1.5T Executive(RM 89,800)、1.5T Premium(RM 101,800)、1.5T Flagship(RM 113,300) 等等。
Toyota Corolla Cross 喺馬來西亞嘅 OTR 售價係 RM 133,800 - 148,800,總共有 3 個版本,包括 2026 HEV 1.8L GR Sport(RM 148,800)、2026 HEV 1.8L Standard(RM 140,800)、2026 1.8L Standard(RM 133,800) 等等。
從價錢睇,Proton X50 嘅起標價確實比 Toyota Corolla Cross 平咗 RM 44,000。如果你預算有限,Proton 嘅入門版已經可以滿足日常需要。但亦要記住,平咗嗰幾千塊,可能喺配備上會有取捨,具體要睇你嘅需要。

Proton X50 嘅安全評級係 5★ (ASEAN NCAP),主動安全系統包括 ADAS (ACC, AEB, LKA, LDA, BSM, RCTA)。
Toyota Corolla Cross 嘅安全評級係 5★ (ASEAN NCAP),主動安全系統包括 TSS (PCS, LDA, ACC, LTA)。
兩款車嘅安全評級一樣,喺呢個級別入面安全配備都算好齊全。依家嘅新车安全性都唔差,唔使太擔心呢一點。

Proton X50 車身長 4400 mm,後尾箱 400 L。
Toyota Corolla Cross 車身長 4400 mm,後尾箱 400 L。
兩款車嘅尺寸幾近一樣,車內空間差別唔大。呢個級別嘅車,日常使用完全夠用。

Proton X50 保修 5 年/150,000km,保養間隔 每 10,000km 或 6 個月。
Toyota Corolla Cross 保修 5 年/里程無限制,保養間隔 每 10,000km 或 6 個月。

Proton X50 同 Toyota Corolla Cross 都係馬來西亞市場嘅主流選擇,適合家庭使用、日常通勤。如果你更重視品牌口碑同二手價,可以優先考慮口碑更好嗰一款;如果你更介意性價比同配備,那就揀配備更豐富嗰款。最終都係建議兩款都去試駕,親身體驗先至最緊要。

總體嚟講,Proton X50 同 Toyota Corolla Cross 都係馬來西亞市場幾唔錯嘅車款。揀邊一部,關鍵都要睇你嘅個人需求同預算。建議大家做好功課,多比較幾間車行嘅報價,先至去試駕做最終決定。買車係件大事,花少少時間做功課絕對唔會錯。
